DYNAMITES

DANUBIT® A
DANUBIT A is a plastic tritol-free mining rock explosive with a higher content of nitroesters designed mainly for a mass mining of raw materials on surface as well as underground. It can also be used under water. It is produced on modern continuous lines in the form of small-diameter and large-diameter lays. A fuse No. 8 or primacord are used for exploding. The explosive can be pneumatically charged.

DANUBIT® 2
DANUBIT 2 is a plastic tritol-free mining rock explosive designed mainly for a mass mining of raw materials on surface as well as underground. It is produced on modern continuous lines in the form of small-diameter and large-diameter lays. It can also be used under water. A fuse No. 8 or primacord is used for exploding. The explosive can be pneumatically charged.

DANUBIT® 3
DANUBIT 3 is a plastic tritol-free mining rock explosive with a higher content of nitroesters designed for all kinds of shot firing on surface and underground, in locations without any danger of an explosion of gases, dust and vapours. It is also suitable for shot firing works under water. The explosive can be pneumatically charged. A fuse No. 8 or primacord are used for exploding. It can also be used for fuse igniting of other explosives, especially of DAP type.

DANUBIT® - GEOFEX 2
DANUBIT - GEOFEX 2 is a plastic mining rock explosive for special purposes. The explosive is designed mainly for geologic exploration and seismic research, for disconnecting of rocks by means of the technology of pop, for fuse igniting of other types of explosives - mainly DAP and emulsion explosives. It can be used both on surface and underground. The explosive is highly resistant against water. It is produced in the form of small-diameter or pop lays. A fuse No. 8 or primacord is used for exploding. The explosive has a stabilized detonating speed.

DANUBIT® BHV
The explosive DANUBIT BHV is designed mainly for special types of shot firing works designated as a controlled breakup (side underfiring, smooth breakup) on surface and underground as a mining rock explosive in non-explosive environment under conditions mentioned in rules on explosives. The smallest approved diameter for use is 20 mm. An igniting agent with initiating ability that is not smaller than that of the standard firing fuse No. 8 is used for fusing of explosive.

ECODANUBIT®
ECODANUBIT is an ecologic mining rock gelatine explosive that differs from common dynamites by the fact that it does not contain any carcinogenic components (nitro-aromates, as e.g. DNT and TNT). ECODANUBIT has a significantly lower toxicity of post-explosion products. The explosive is designed mainly for a mass mining of raw materials on surface and underground in an environment without a danger of explosion of gases, vapours and dusts.

SAFE-FOR MINING EXPLOSIVES

HARMONIT® AD
HARMONIT AD is a semiplastic safe mining anti-gas explosive of 2nd category with an increased safety in an antideflagration treatment. The explosive is designed mainly for shot – firing works in coal in gas-producing coal mines. It is produced in a modern continuous line in the form of small-diameter blasting cartridges. Fuse No. 8 is used for initiating.

CARBODANUBIT®
CARBODANUBIT is a plastic mining-safe anti-dust explosive designed mainly for shot firing in gas-not-producing brown coal mines. The explosive can also be used under water. It is produced in the form of small-diameter lays. Fuse No. 8 is used for initiating.

SLAVIT® V
SLAVIT V is a semiplastic mining-safe anti-gas explosive of 1st category designed mainly for shot firing in coal in gas-producing coal mines. It can be used for shot firing in rock in gas-producing coal mines and in mines with a danger of rupture of coal and gases. It is produced in a modern continuous line in the form of small-diameter blasting cartridges. Fuse No. 8 is used for initiating.

BULK EXPLOSIVES

POLONIT® V
POLONIT V is a bulk surface explosive designed mainly for chamber and bench blastings of mass mining in all rocks. It is produced in a modern continuous line in the form of large-diameter lays or as a freely bulk explosive. It can be used in a humid environment, as well. Fuse No. 8 is used for initiating.

ANFO EXPLOSIVES

DAP® 1
DAP 1 is a bulk surface explosive designed exclusively for chamber and bench blastings of mass mining on surface. It is produced in a modern continuous line in the form of large-diameter lays or as a freely bulk explosive. Lay explosive can be used in a humid environment, as well; freely bulk explosive can be used only in dry drillings.

DAP® 2
DAP 2 is a bulk mining rock explosive designed for mining of rocks in surface and underground in environment without a danger of explosion of gases, vapours or dusts. It is produced in a modern continuous production line as a freely bulked explosive. It can only be used in a dry environment and into it can be bulked or pneumatically charged into drillings.

DAP® 3
DAP 3 is a bulk surface explosive designed exclusively for chamber and bench blastings of mass mining of rocks on surface. It is of granulated consistence which significantly improves handling at shot firing works. It is produced in a modern continuous production line as a freely bulked explosive. The used technology enables producing the explosive in a wider range of shooting-technical parameters and consistence according to requirements of customers. DAP 3 can be used only in dry drillings into which it can be bulked or pneumatically charged.

DAP® 4
DAP 4 is a bulk mining rock explosive with an increased energetic effect designed for mining of rocks in surface and underground in environment without a danger of explosion of gases, vapours or dusts. It is produced in a modern continuous production line as a freely bulked or laid explosive. It can only be used in a dry environment and into it can be bulked or pneumatically charged into drillings.

DAP® E
DAP E id aloose powder rock-blasting permissible explosive with enhanced energy effect for surface and undergroun blasting in an atmosphere without of danger of gas, vapour and dust explosion. It si produced in a from of loose powder explosive or cartridges. The explosiv is used only in dry enviroment and can be poured or pneumatically loaded in boreholes. The detonator No.8 works reliably with the explosive. DAP-E is characteristic by reduced smell by manipulation and storage.